Why We Love All-Electric Homes

We are big believers in all-electric Passive House home design. Who wouldn’t love the huge reductions in energy use coupled with renewable energy, and no more fossil fuel use at home?  But there are a few habits to change while living in a Passive House. 

This recent NYT opinion piece co-authored by our friends at the Rocky Mountain Institute does a great job of explaining away any hesitations you might have about building an all-electric home — especially if you are still under the impression that gas stoves are superior for cooking. Our Accord Passive House has an induction stove in the kitchen and Peter absolutely loves it.

Why do all-electric homes make sense now? Because technology has come to the rescue, in the form of devices called heat pumps. They run on electricity, but far more efficiently than the electric appliances of our parents’ generation. So if we start installing them now, then as the electric grid gets greener, our buildings will be contributing less and less to climate change.

"Is the Hudson Valley Turning Into the Hamptons?"

So much to say about today’s New York Times article!  We love the Hudson Valley.  An abundance of history and beauty, and smart, talented people who want to take care of this place and this planet.  Welcome to the newcomers!  But a key part of any new development has to be energy independence, which is why NRAP is committed to affordable Net Zero design.

Accord Passive House Selected for Dezeen Awards Architecture Longlist

Accord Passive House Exterior

Wow! From more than 3,600 total submissions from 91 countries, our Accord Passive House project is among the 32 house projects selected for the architecture longlist for the first Dezeen Awards, and one of only four projects in the United States! We are honored to be in such excellent company with our fellow nominees.

The awards program celebrates the world’s best new architecture, interiors and design with an emphasis on beauty, innovation, social impact and sustainability.


Shared Commitment to Sustainable Design: #TBT to Milano Design Week 2018

While the rest of us were stuck in a seemingly never-ending winter season, our Senior Designer Peter Reynolds was enjoying Milan in springtime for Milano Design Week 2018, the Salone di Mobile. Peter consults with Eileen Fisher DesignWork and collaborated on the design of the space for the brand's Waste No More exhibit at Ventura Centrale with Li Edelkoort Inc, who curated the show. The exhibit generated a flood of great press for Eileen Fisher’s mission as a socially responsible brand — in Metropolis, the New York Times  FashionUnited and W Magazine, to name a few. 

The provocative DesignWork initiative challenges the fashion industry’s massive contribution to pollution through a zero waste creative exchange that upcycles their customers' used clothing into artwork, upholstery, clothing, pillows and home products, and commercial interior surfaces. North River had already incorporated several of these emerging felted artworks into our architectural design of the new Eileen Fisher Creative Center in Union Square.

Another Tour!

Accord Passive House

North River Architecture will be hosting another Passive House tour on Saturday, November 11 from 1-4pm, this time as part of New York Passive House’s International Passive House Days tours. For more information about other tours in the area and to RSVP, please visit https://www.meetup.com/NYPassiveHouse-NYC/events/244682949/

We are pleased to confirm with this project that Passive House can be accessible, affordable and architecturally innovative. We are committed to exploring innovative and least-cost solutions using standard construction materials and training local contractor teams in Passive House construction.

Please come see our project during construction – the walls are being closed up now with sheetrock work, but you can still see some of the best parts of Passive House design – the ventilation and mechanical systems, exterior insulation and rainscreen wall detailing, taping and air sealing.  It’s all part of our tool kit for all of our projects now, and we would be glad to have you stop by on Saturday to see for yourselves. 

The NRAP Team

Passive House Tour

On Saturday, September 9, nearly fifty people joined North River Architecture & Planning (NRAP) for a mid-construction tour of our Passive House project in Accord, NY, hosted by the Hudson Valley chapter of the national Passive House Alliance.

NRAP is working with PHIUS, the Passive House Institute US, to achieve PHIUS+ Certification for this 1,730 sf single-family residence, which was designed by NRAP for our Senior Designer, Peter Reynolds.  The house has a 9kW photovoltaic array on roof, which is expected to make this a Net Zero building, producing more energy annually than the building requires.

The tour was timed so that the building systems and details would still be visible before the insulation is installed the following weeks. Attendees were able to inspect these systems up close, with presentations given by Stephanie Bassler, RA, CPHC and Peter Reynolds of NRAP; John Loercher, CPHC, energy modeler and Passive House consultant; Troy Hodas, PHIUS Rater; Cramer Silkworth, mechanical engineer; and Matt Calardo of Lighthouse Solar.

Stephanie and Peter began their presentation with an overview of the project goals of Passive House affordability, use of local contractor talent, and on-the-job Passive House training for the trades.  Because not everyone in attendance worked in the industry, for those new to the Passive House world, we talked about what makes a building “Passive” and why we are so passionate about Passive House.  We continued with more detailed descriptions of the building envelope and building systems choices as well as lessons learned. 

Some key notes from our presentation follow:

Contractor Training:

NRAP’s experience so far on this project with contractor training was mostly positive, with all trades fully aware of and respecting the airtightness requirements.  Peter is acting as his own General Construction Contractor and manages the subcontractors directly, which allowed NRAP team to be very hands on in communicating critical Passive House details to the team.  Most assemblies have proceeded without any issues, although the European windows and doors posed some challenges to a crew unfamiliar with those installation requirements. 

PHIUS+ Rater:

This was NRAP’s first experience working with a PHIUS+ Rater.  This team member is a required part of PHIUS+ certification, and is meant to ensure compliance not just with PHIUS certification requirements, but also the requirements of the related programs, including DOE’s Zero Energy Ready Homes and NYSERDA’s program for Energy Star homes.  One of the lessons learned by the NRAP team on this project was the importance of layering rigid insulation materials, for which Troy was instrumental in giving step by step guidance.  By using single layers of EPS under the slab, and Polyisocyanurate on the walls, we were required to manage the gaps between panels very carefully, and had to do an exhaustive job of spot repair with expanding foam sealant (not our preferred material…) when the joints were too wide. PHIUS Rater inspections have been instrumental to our success so far with our certification goal, as we have been made aware during each phase of work what to pay attention to, and when corrective measures were necessary. 

Mechanical Systems:

Electric air-source heat pumps were selected for heating and cooling this building.  These systems have the efficiencies required by PHIUS, and when ductless systems are used, they are quite affordable and readily available.  While the heating and cooling demands for this project allowed us to install a system that in total is one-sixth the size of what would be required for a code-built house, we are still working on an architecturally satisfying solution for what these heat pumps look like, which is a concern in the residential marketplace generally. 

WUFI Passive:

John Loercher’s work as WUFI Modeler was an integral component of the design work by the NRAP team.  Beginning with an early design phase feasibility study to confirm that we were on the right track to achieve Passive House certification, we continued to work with John to test options of insulation values, window performance, shading conditions, thermal bridging, and mechanical systems as we finalized all aspects of the design.  John also coordinates our submissions to PHIUS and responses to the PHIUS team’s review comments.  In our previous Passive House certified project at the Omega Institute, NRAP managed the PHPP energy modeling and related work in-house, but have found that working with John has allowed us to focus more effectively on design, drawings and construction phase concerns, while knowing that the Passive House compliance strategy is handled by NRAP and our team partners.

Our goal is ultimately to demonstrate the accessibility and affordability of Passive House design, and to dispel the myths and misconceptions about the process to those who are considering renovating or building their own Passive House. The Passive House Alliance Hudson Valley chapter's work very closely aligns with our goal, and we were glad to have an opportunity to spread the word about their work!

Check back for updates on our upcoming project tours, and be sure to follow our work on Facebook and Instagram @northriverarchitecture.

Stephanie and Peter

Project Team:
North River Architecture and Planning – CPHC & Architect
Kaaterskill Associates – Structural Engineer
Baukraft Engineering – Mechanical Design
Northeast Projects LLC– WUFI Passive energy modeling
Spruce Mountain, Inc. – PHIUS+ Rater